https://hobartmeatgrinder.org Tue, 12 May 2026 15:11:24 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://hobartmeatgrinder.org/2026/03/vtg-hobart-kitchenaid-model-g-commercial-stand-mixer-3-speed-runs-w-pastry-knife/ https://hobartmeatgrinder.org/2026/03/vtg-hobart-kitchenaid-model-g-commercial-stand-mixer-3-speed-runs-w-pastry-knife/#comments Sun, 22 Mar 2026 07:41:52 +0000 https://hobartmeatgrinder.org/2026/03/vtg-hobart-kitchenaid-model-g-commercial-stand-mixer-3-speed-runs-w-pastry-knife/















Missing screws for the switch plate and on the motor. It does not shift gears when you turn the little leaver, not sure if something is missing or the fork is not grabbing what its supposed to. It was gummed up with hard grease and did not run, I did open it up and scrape some out but it needs to be disassembled, degreased, rewired and repainted but a very worthy project. The bucket raise and lower works freely. Everything in photos related to the mixer included, pastry knife, mixing paddle, dough hook, whisk, double roller and sieve(I think these go together but not sure), coffer mill, meat grinder, mixing bucket, can opener and a drive for what was a clear glass juicer but the glass was broken. I dont see a drive for the milk glass juicers.

]]> https://hobartmeatgrinder.org/2026/03/vtg-hobart-kitchenaid-model-g-commercial-stand-mixer-3-speed-runs-w-pastry-knife/feed/ 0 https://hobartmeatgrinder.org/2025/08/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces-3/ https://hobartmeatgrinder.org/2025/08/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces-3/#comments Sun, 24 Aug 2025 07:10:07 +0000 https://hobartmeatgrinder.org/2025/08/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces-3/




Gear Shaft for various meat grinders.

]]> https://hobartmeatgrinder.org/2025/08/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces-3/feed/ 0 https://hobartmeatgrinder.org/2025/08/vintage-hobart-4312-heavy-duty-meat-grinder-80-cycle-1725-speed-working/ https://hobartmeatgrinder.org/2025/08/vintage-hobart-4312-heavy-duty-meat-grinder-80-cycle-1725-speed-working/#comments Thu, 14 Aug 2025 18:38:05 +0000 https://hobartmeatgrinder.org/2025/08/vintage-hobart-4312-heavy-duty-meat-grinder-80-cycle-1725-speed-working/












The only tests preformed were turning it on and letting it run for a little bit. Nothing was attached or grinned so if you need further testing please let me know.

]]> https://hobartmeatgrinder.org/2025/08/vintage-hobart-4312-heavy-duty-meat-grinder-80-cycle-1725-speed-working/feed/ 0 https://hobartmeatgrinder.org/2025/03/hobart-hob00-914127-gear-assembly-low-speed-fits-hobart-4822-meat-grinder/ https://hobartmeatgrinder.org/2025/03/hobart-hob00-914127-gear-assembly-low-speed-fits-hobart-4822-meat-grinder/#comments Fri, 21 Mar 2025 20:11:48 +0000 https://hobartmeatgrinder.org/2025/03/hobart-hob00-914127-gear-assembly-low-speed-fits-hobart-4822-meat-grinder/






Hobart HOB00-914127 Gear Assembly, Low Speed, Fits Hobart 4822 Meat Grinder. Check out my feedback! Tracking is provided on ALL Orders.

]]> https://hobartmeatgrinder.org/2025/03/hobart-hob00-914127-gear-assembly-low-speed-fits-hobart-4822-meat-grinder/feed/ 0 https://hobartmeatgrinder.org/2024/11/hobart-n50-mixer-commercial-counter-top-5-quart-3-speed-2/ https://hobartmeatgrinder.org/2024/11/hobart-n50-mixer-commercial-counter-top-5-quart-3-speed-2/#comments Sat, 23 Nov 2024 19:43:15 +0000 https://hobartmeatgrinder.org/2024/11/hobart-n50-mixer-commercial-counter-top-5-quart-3-speed-2/










Hobart N50 Mixer Commercial Counter Top 5 Quart 3 Speed. Comes with all the attachments in the pics. The mixing attachments and bowl are Hobart and the meat grinder and grader/veggie slicer are kitchen aid. (Probably made by the kitchen aid/Hobart division). Gears have been re-packed. The on/off & centrifugal switch’s in the motor have both been cleaned and contacts resurfaced. Runs quietly & flawlessly. I was told by Hobart the year of manufacture is 1967. Happy to answer any Qs.

]]> https://hobartmeatgrinder.org/2024/11/hobart-n50-mixer-commercial-counter-top-5-quart-3-speed-2/feed/ 0 https://hobartmeatgrinder.org/2024/10/hobart-n50-mixer-commercial-counter-top-5-quart-3-speed/ https://hobartmeatgrinder.org/2024/10/hobart-n50-mixer-commercial-counter-top-5-quart-3-speed/#comments Sat, 19 Oct 2024 07:05:54 +0000 https://hobartmeatgrinder.org/2024/10/hobart-n50-mixer-commercial-counter-top-5-quart-3-speed/










Hobart N50 Mixer Commercial Counter Top 5 Quart 3 Speed. Comes with all the attachments in the pics. The mixing attachments and bowl are Hobart and the meat grinder and grader/veggie slicer are kitchen aid. (Probably made by the kitchen aid/Hobart division). Gears have been re-packed. The on/off & centrifugal switch’s in the motor have both been cleaned and contacts resurfaced. Runs quietly & flawlessly. I was told by Hobart the year of manufacture is 1967. Happy to answer any Qs.

]]> https://hobartmeatgrinder.org/2024/10/hobart-n50-mixer-commercial-counter-top-5-quart-3-speed/feed/ 0 https://hobartmeatgrinder.org/2024/06/hobart-30-qt-commercial-mixer-3-speed-good-condition-with-bowls-and-attachments/ https://hobartmeatgrinder.org/2024/06/hobart-30-qt-commercial-mixer-3-speed-good-condition-with-bowls-and-attachments/#comments Fri, 07 Jun 2024 21:29:12 +0000 https://hobartmeatgrinder.org/2024/06/hobart-30-qt-commercial-mixer-3-speed-good-condition-with-bowls-and-attachments/









Lovely Hobart 30 Quart Commercial Mixer with 2 mixing bowls, 3 wire whips, 1 grater with 4 sizes, a dispenser and meat grinder included! In good working condition; has been professionally serviced. Incredibly useful piece of equipment!

]]> https://hobartmeatgrinder.org/2024/06/hobart-30-qt-commercial-mixer-3-speed-good-condition-with-bowls-and-attachments/feed/ 0 https://hobartmeatgrinder.org/2024/05/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces-2/ https://hobartmeatgrinder.org/2024/05/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces-2/#comments Sat, 18 May 2024 07:05:02 +0000 https://hobartmeatgrinder.org/2024/05/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces-2/




Shaft, for Gear Assembly (Low speed) fits Hobart Grinders 4812 and N50. Gear Shaft for various meat grinders. Fits Brand(s): Hobart Includes: (1) Shaft Replaces: 00-944046 Description: Gear shaft Fits Models: 4812, 4812CE, N50. Fits Brand(s): Hobart. Fits Models: 4812, 4812CE, N50. Sorry, our items are NOT available for pick-up. No additional information at this time. You might also like. HOBART CARRIAGE THUMB SCREW. Sharpener assembly and cover, polished Aluminum, for Berkel Slicers 808 – 817. RETAINER AND SEAL ASSY FOR FRONT/REAR DRIVE SHAFTS, replaces 292675. BEARING RETAINER ONLY FOR FRONT/REAR DRIVE SHAFTS.

]]> https://hobartmeatgrinder.org/2024/05/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces-2/feed/ 0 https://hobartmeatgrinder.org/2024/02/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces/ https://hobartmeatgrinder.org/2024/02/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces/#comments Fri, 01 Mar 2024 00:37:46 +0000 https://hobartmeatgrinder.org/2024/02/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces/




Shaft, for Gear Assembly (Low speed) fits Hobart Grinders 4812 and N50. Gear Shaft for various meat grinders. Fits Brand(s): Hobart Includes: (1) Shaft Replaces: 00-944046 Description: Gear shaft Fits Models: 4812, 4812CE, N50. Fits Brand(s): Hobart. Fits Models: 4812, 4812CE, N50. Sorry, our items are NOT available for pick-up. No additional information at this time. You might also like. HOBART CARRIAGE THUMB SCREW. Sharpener assembly and cover, polished Aluminum, for Berkel Slicers 808 – 817. RETAINER AND SEAL ASSY FOR FRONT/REAR DRIVE SHAFTS, replaces 292675. BEARING RETAINER ONLY FOR FRONT/REAR DRIVE SHAFTS.

]]> https://hobartmeatgrinder.org/2024/02/shaft-for-gear-assembly-low-speed-fits-hobart-grinders-4812-and-n50-replaces/feed/ 0 https://hobartmeatgrinder.org/2023/08/hogo-hobart-gear-speed-reducer-for-mixer-powerhead-attachments-12-meat-grinder/ https://hobartmeatgrinder.org/2023/08/hogo-hobart-gear-speed-reducer-for-mixer-powerhead-attachments-12-meat-grinder/#comments Sat, 19 Aug 2023 03:54:16 +0000 https://hobartmeatgrinder.org/2023/08/hogo-hobart-gear-speed-reducer-for-mixer-powerhead-attachments-12-meat-grinder/






HOGO Hobart Gear Speed Reducer for Mixer or Powerhead Attachments.

]]> https://hobartmeatgrinder.org/2023/08/hogo-hobart-gear-speed-reducer-for-mixer-powerhead-attachments-12-meat-grinder/feed/ 0