Hobart 4346 Commercial Meat Grinder-Mixer. 3 Phase, 208/220 Volt, 7.5 HP, 22.0 Amps, 1725 RPM. OVER ALL DIMENSIONS (WIDTH X DEPTH X HEIGHT). 28″ W x 40″ D x 57 H. GAS (LP – NP). Up to 215 pounds. 55 to 60 pounds of fresh boneless beef per minute. The arm can be removed from the hopper for cleaning without tools by removing the bearing retainer on the front of the hopper. The arm rotates at 29 RPM. An electrical interlock switch is provided for operator safety. Whenever hopper guard is open, power to motor is cut off. The hopper guard must be closed before machine can be started. Standard legs with casters clearance between floor and lowest point on adjusting ring. Stainless steel hopper, tinned deflector and mixing arm; tinned cast iron cylinder, adjusting ring and worm; stainless steel hopper guard, motor shroud and rear panel. MULTIPLE QUANTITIES THE PHOTOS MIGHT NOT REPRESENT THE EXACT ITEM. MEASUREMENTS FOR REFURBISHED, USED OR SECOND HAND ITEMS ARE FIELD MEASUREMENTS. SUCH MEASUREMENTS MAY NOT BE EXACT AND, IN PRACTICE, WE ROUND UP MOST MEASUREMENTS TO THE NEAREST FULL INCH. OUR CONTACT INFORMATION IN THE BOTTOM OF OUR LISTING. QUALITY RESTAURANT EQUIPMENT MASTERS. Welcome to our store. We represent that to the best of our knowledge the goods are as described in the above listing. We do our very best to present items as accurately as possible based on the information that is available to us. Quality Restaurant Equipment Masters reserves the right to correct any errors or inaccuracies in any of our listings at any time. We specifically disclaim any implied warranties of title, merchantability, fitness for a particular purpose and non-infringement. Customers should satisfy themselves that any item choice made is suitable for their intended purpose or use. Please be advised we do our very best to test all of our equipment to make sure it is functioning properly when it arrives at your doorstep! We stock a tremendous amount of secondhand (used) equipment. These items fall under different categories. Some items are in good shape when we receive them and require minimal cleaning and no refurbishing. Other items require dismantling and replacement of parts in addition to painting and refinishing. We always try to describe our items as best as possible, but in some cases, certain observations may be overlooked due to the amount of volume we sell. An example of this may be that an item may be missing a part that is not shown in the photos. Please do not assume that the item comes with the part if it is not shown. If no current specs or information is available, we will match it to the closest product. Measurements for Refurbished, Used or Second Hand items are field measurements. Such measurements may not be exact and, in practice, we round up most measurements to the nearest full inch. In the event that our Field Measurement turns out to be incorrect, you hereby agree that said mistake in measurement shall NOT constitute a reason to return the item or to cancel the sale. Products listed as “Tested & Working” or in working condition are exactly that. Something like a light bulb not working or a timer bell not functioning does not affect the working condition of an item and these things may occur. Items listed as “Not Tested” or “As Is” are exactly that. We have not tested them and we do not imply that they work. What you see is what you get. Please keep in mind our hours of operation. Within our policies, we are always willing to make customers happy. If you do not communicate with us, we cannot help you. Inventory of new items is provided to us by the distributor. We do not take responsibility for any error or misrepresentation. Please be fair when making an offer, do your research in the market first, know the item worth! NEW ITEMS: Please keep in mind that if you open the box or package on a new item and in any way attempt to use it, you will not be able to return it. They have trained people that will know if it has been used. We pass our discount along to our clients. If you are running a business out of your home, you are still classified as a residence. This means that it must be lowered to the ground from the truck, which is usually 3-5 feet off of the ground. You must have the tools and man power to uncrate your item and bring it inside. The driver is not required to provide any tools or assistance. Even though we crate, palletize, and use protective materials on our items, we sometimes cannot control mishandling or damages that may occur while in transit. If there is any damage, it must be indicated on the BILL OF LADING that the driver gives you to sign. If you do not examine the merchandise and you still sign for it, we will not be able to file a claim or hold the shipper responsible. If your item has been crated, please expect to uncrate it and inspect it before the driver has left and before you sign for it. A driver is obligated to wait. Oak Park MI, 48237. The item “Hobart 4346 Commercial Meat Grinder-Mixer” is in sale since Thursday, July 06, 2017. This item is in the category “Business & Industrial\Restaurant & Catering\Commercial Kitchen Equipment\Food Preparation Equipment\Meat Grinders & Butcher Supply\Meat Grinders”. The seller is “qremshop” and is located in Oak Park, Michigan. This item can be shipped to United States.
- Brand: Hobart
- Model: 4346
- MPN: 4346
- Country/Region of Manufacture: United States