HOBART, Meat Grinder – Mixer / Butcher. The Model 4346 Mixer/Grinder hopper has meat capacity of up to 215 pounds for first grind, depending on type of product. It has a grinding rate of 55 to 60 pounds of fresh boneless beef per minute, first or second cutting through a 1 8″ plate — 60 to 65 pounds of pork per minute, first cut through a 34″ plate and 55 to 60 pounds of pork per minute second cut, (after 3 4″ breaker plate) through a 3 16″ plate. Frozen meat must be tempered to 24°F or higher, and can be in flake or 11 4″ x 114″ stick form. Interlock switch is provided for operator safety. Whenever hopper guard is open, power to motor is cut off. The Hopper guard must be closed before machine can be started. Standard legs with casters. Finish: Stainless steel hopper, tinned deflector and mixing arm; tinned cast iron cylinder, adjusting ring and worm; Stainless steel hopper guard, motor shroud and rear panel; base assembly is galvanized. The model 4346 can be used in tandem with Hobart or competitive grinders in all sizes from #32 through # 56 Adapters or special adjusting rings are available for this purpose. Electrical data: 208 volt / 60 Hertz / 3 phase / Horse power 7-1/2 / 220 amps. This unit has been REFURBISHED by Our Company Charney Commercial, non-working parts are replaced. Renew or to restore to a new condition. The Equipment has been repaired by our third party Company and resold. We specialize in new and used commercial equipment. We choose each line and machine carefully, we test each one of them to make sure that we are supplying top quality food equipment. Check back often for. We pass our savings on to you! We leave no stone unturned! In order to provide the best quality equipment not found in other stores. Charney Commercial Sales does not offer credit terms. ALWAYS examine all items for damage BEFORE accepting them from shipper. Nevertheless, damage may occur occasionally in transit. We will give you any information you need. Inspect package before signing. If anything is wrong with the item please note it on all copies of the bill of lading and immediately contact the trucking company. Charney Commercial Sales agrees to present all items description as accurately as possible based on the information available to us. Purchaser is responsible to make sure that all equipment is assembled, installed, and adjusted by certified or licensed, and authorized personnel. Our costumers safety is very important to us. For that reason before operating this unit, safety instructions must be read. To reduce the risk of injury. § Plug into grounded electrical outlets only. § Use only on flat, level surfaces. § Do not immerse in water. § Do not spray with water. § Do not operate this equipment if you are not qualified or trained to do so. ELECTRIC SHOCK, FIRE OR BURN INJURIES CAN OCCUR IF THIS EQUIPMENT IS NOT USED PROPERLY. Provisions in case of your equipment is not working properly. A Have proof of installation date and certified technicians name and business name MUST BE submitted attached with a machine checklist prior to work being performed. B Repairs shall be performed within thirty (30) miles from customers business. But must be approved by Charney Commercial Sales. C Prove that the equipment has not been damaged, altered, or misused. D Prove that equipment was properly installed, adjusted, operated, and maintained in accordance with national, state, and local codes for commercial kitchens. E Charney Commercial Sales shall not be liable, whether in contract or in tort, or under any other legal theory, for loss of use, revenue or profit, or for substitute use of performance, for incidental, indirect, or special, or consequential damages, or for any other loss of cost of similar type. Equipment must be installed by certified technicians only. Purchaser is responsible to follow safety procedures, warnings in the industry standards. Purchaser is responsible to report any problems or concerns within 10 days of receipt of the item. Any reports of malfunction must include an inspection report from a certified, licensed, authorized or experienced technician. Technician must provide Charney Commercial Machine with machines model number and serial number. We will give your situation priority service. Please read these conditions carefully. We can store your equipment in our warehouse for 30 days only. Whether it is a business residence or church. Whether or not you will need a lift gate. The name of your Business. Si estas interesado(a) en adquirir alguno de nuestros productos y te gustaria obtener más información puedes llamarnos. We will work with you to decide which parts are necessary, if any. We will supply any parts deemed necessary. We will not pay for any labor. However, we will not supply any parts or pay for any labor for refrigeration. We are not responsible for operator negligence. If we are not contacted we will not accept your item. Charney Commercial Sales 2035 28Th St Wyoming, MI 49519. The item “HOBART, Meat Grinder-Mixer 4346 Butcher” is in sale since Thursday, April 4, 2019. This item is in the category “Business & Industrial\Restaurant & Food Service\Commercial Kitchen Equipment\Food Preparation Equipment\Meat Grinders & Butcher Supply\Meat Grinders”. The seller is “charneycommercial” and is located in Wyoming, Michigan. This item can be shipped to United States.
- Model: 4346
- MPN: Does Not Apply
- Brand: HOBART