Tested by our technicians and works great! 208 Volt, 3 Phase, 30 Amp. Will need hardwired into power by an electrician. 150 lb hopper capacity, 55-60 lb per minute output. 7.5 HP Grind Motor & 1 HP Mix Motor. Working pneumatic foot control. Assorted #32 knives and plates included. Approximately 48-3/4″ Tall x 26-7/8″ Wide x 50-3/4 Deep. Grind motor and 1H. Casters and air-drive foot switch are standard. ELECTRICAL CONTROLS: Electrical controls consist of front mounted water resistant switches, magnetic contactors, dual motor overload protection and foot switch operation capability. An electrical interlock switch is provided. Whenever the hopper lid is opened, power to the motors is shut off. The hopper lid must be in its proper operating position before the motors can be started. CAPACITY: The MG1532 Mixer-Grinder hopper has meat capacity up to 150 pounds depending on the type of product. The grinding rate is 55 to 60 pounds of fresh boneless beef per minute, first or second cutting through a 1 8″ plate; 60 to 65 pounds of pork per minute second cutting through a 316″ plate. The MG1532 is for fresh or frozen meat tempered to 26 deg. Or higher and can be in flake or stick form. GRINDING END: The mixer-grinder is equipped with a Wedge cylinder grinding end. This grinding end is sized for #32 knives and plates (not included but optionally available). FEEDING SYSTEM: The MG1532 is powered by two separate drive systems. Motor drives the heavy-duty steel mixing arm. The arm rotates at 23 rpm and can easily be removed from the hopper for cleaning. The conveyor screw extends the full length of the hopper and cylinder. The screw rotates at a speed of 216 rpm. By depressing the MIX/GRIND START button both the mixing arm and the screw are operated. Both mixing and grinding are stopped when the STOP switch is depressed. CLEANING: The mixing arm, conveyor screw, cylinder, and conveyor screw drive-shaft seal and mix arm seal are removable from the mixer-grinder for cleaning. FINISH: The mixer-grinder consists of glass bead finished stainless steel hopper, stainless steel panels to enclose the base assembly and motors. The end ring and cylinder are stainless steel. The mixing arm and conveyor screw are tinned. The casters are stainless steel and nickel-chrome plated. Residential or lift gate services may be additional. We are a full-service HVAC/R company just north of Pittsburgh, PA. We have been in business since 1950. We have a 1,500 square foot showroom; items are also for sale locally and to our service customers. We strive to describe and represent each item; we try to point out any defects or blemishes. We are not product experts on every item we list; we try to provide as much information as we can on the item and may include a specification sheet that is that exact model or the one closest to it. Please read the descriptions and look at the pictures and determine if this item is the right one for you. We aim for 100% satisfaction. We stock & sell a large amount of second-hand equipment. We try to describe each item accurately, but sometimes small dings/dents/scratches may be overlooked. Items not in the picture are not included; please do not assume it comes with the part if it is not shown. Please examine each picture; ask for more if needed. We encourage you to ask questions about an item in which you are interested. Factory Specification sheets are sometimes not available for the model listed and we try to get the closest or newest model that closely corresponds. All our items are tested by our certified technicians. Products listed as “TESTED & READY” are tested and in working condition. A video link showing the item during testing may be included if available. Products listed as “NOT TESTED” or “AS-IS” are not tested and we make no statement that they do work. These may be non-working or parts only units. We do not test the parts that are listed for sale. The item will be secured to the pallet and wrapped with plastic and/or wrap. Please let us know before paying so we can adjust your invoice accordingly. We strive to package each item properly, but this isn’t always good enough. Items can be picked up locally. You may come to our location and pay for the item in person if you wish. The request for a return must be made within 24 hours of receiving the item. You receive an item not pictured or described at all. We will leave feedback only after it is left for us. Our goal is 100% satisfaction. The item “Hobart MG1532 Meat Grinder / Mixer 208 Volt 3 Phase” is in sale since Wednesday, October 6, 2021. This item is in the category “Business & Industrial\Restaurant & Food Service\Commercial Kitchen Equipment\Food Preparation Equipment\Commercial Meat Processing Equipment\Meat Choppers & Grinders”. The seller is “fughrefrigerationinc” and is located in Butler, Pennsylvania. This item can be shipped to United States.
- Model: Hobart MG1532
- MPN: MG-1532
- Brand: Hobart